Technical Information

Bottom stiffeners

Visible Area

The bottom stiffener is 2" high and is attached to the fabric
panel with double stick tape.

1.25" of the stiffener will be covered by the panel.
0.75" of the stiffener will be visible.

Top stiffeners

Visible Area

The bottom stiffener is 2" high and is attached to the fabric
panel with double stick tape. It has special hooks on the
left and right side that will hang the panel onto the channelbars.

1.25" of the stiffener will be covered by the panel.
0.75" of the stiffener will be visible.

Graphic panels sizes

How to determine the graphic panel size

The top and bottom stiffener add a total length of 0.75" (bottom) and 1.25" (top) to the total panel size.

Take 2" of the height of the panel. This will give the total length of the praphic panel.

The graphic panel width is the same as the fabric panel width shown throughout the catalog.

Bottom Stiffener

Top Stiffener

Curved Frame Sizes

Front Panel sizes
Panel size in quads	actual panel size	graphic panel size

1 quad high panels	36 3/4" H x 27 7/8" W	34 3/4" H x 27 7/8" W
2 quad high panels	61 1/2" H x 27 7/8" W	59 1/2 " H x 27 7/8" W
3 quad high panels	91 1/2" H x 27 7/8" W	89 1/2 " H x 27 7/8" W

Back Panel sizes
Panel size in quads	actual panel size	graphic panel size

1 quad high panels	36 3/4" H x 32 1/2" W	34 3/4" H x 32 1/2" W
2 quad high panels	61 1/2" H x 32 1/2" W	59 1/2 " H x 32 1/2" W
3 quad high panels	91 1/2" H x 32 1/2" W	89 1/2 " H x 32 1/2" W

Round Endcaps sizes
Panel size in quads	actual panel size	graphic panel size

1 quad high panels	36 3/4" H x 19" W	34 3/4" H x 19" W
2 quad high panels	61 1/2" H x 19" W	59 1/2 " H x 19" W
3 quad high panels	91 1/2" H x 19" W	89 1/2 " H x 19" W

Last modified: 01/04/07